61 13... Socket Housing 42-, 43-Pin, Hybrid System MQS/MPQ

Manufactured by AMP:  The following contact types without strand sealing can be fitted in the socket housings:

• MQS (Micro Quadlock System)
• MPQ, width 2.8 mm (Micro Power Quadlock)
• MPQ, width 5.2 mm (Micro Power Quadlock)

Open secondary locks (1) on socket housing.

Press back retaining hook of MQS contacts (2) with special tool 61 0 312 61 1 134 and pull out cable with contact.

Press back retaining hook of MPQ contacts (3) with screwdriver and pull out cable with contact.

Fig 1: Pressing Back Retaining Hook Of MPQ Contacts With Screwdriver

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Bend open retaining hook of contacts gently before inserting into connector housing.

For installation of contacts, observe chamber numbers on reverse side of socket housing.

Fig 2: Identifying Cavity Numbers On Reverse Side Of Socket Housing

Courtesy of BMW OF NORTH AMERICA, INC.