61 13... Circular Connector, 20-Pin, System D2.5

Carefully press back retaining tabs (1) of internal connector (2).

Fig 1: Pressing Back Retaining Tabs Of Internal Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Turn internal connector (2) until retaining lugs (1) snap into release groove (3).

Fig 2: Turning Internal Connector

Courtesy of BMW OF NORTH AMERICA, INC.

With special tool 61 0 303 press down retaining hook (4) of corresponding contact and pull out cable.

Fig 3: Pulling Out Cable By Pressing Down Retaining Hook Using Special Tool 61 0 303

Courtesy of BMW OF NORTH AMERICA, INC.