61 35 177 Removing And Installing/Replacing Rain/Light Sensor

Unclip cover (1) in direction of arrow and remove.

Fig 1: Removing Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Pull out locks (1) in direction of arrow and remove rain sensor (2).

Disconnect plug connection (3) and remove rain sensor (2).

Installation: 

Do not damage optical element covered by rain sensor (2).

If necessary, initialize rain sensor (2).

Fig 2: Pulling Out Locks

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

Carry out programming/coding.