67 62... Notes on initializing power windows: Notes

WARNING:

Danger of injury!

There is no anti-trap mechanism during initialization.

NOTE: An initialization must be performed:

In the event of malfunctions, e.g. no toll function, no opening or if available no convenience function is possible
Following replacement of drive for power window regulators
After work is carried out on the power window mechanism
If necessary, after an open circuit, e.g. disconnection of the battery or disconnection of the power supply to the door
After the door window glass has been removed and installed or replaced
After adjusting procedure on the door window glass
After adjusting procedure on the convertible top
After replacement of seals

Initialization is performed on the power window switch of the relevant door.

Requirements for correct initialization:

Initialization comprises: