Body Molding: Notes

Rear Quarter Glass - lower trim is secured by seven `snap fit' clips. The clips to the body are secured by means of `T' studs welded to the body rear quarter panel. This trim will need to be removed if the rear quarter glass is to be removed.
Rear Quarter Glass Trim Front - attached directly to the front edge of the rear quarter glass.
Rear Quarter Glass Trim Rear - attached directly to the rear edge of the rear quarter glass.
Front Door Glass - waist seal trim is clipped to the door skin flange.

Fig 1: Quarter Glass Trim Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 2: Welded 'T' Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 3: Replaceable Trim Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Workshop Hints

Care must be taken when removing the rear quarter glass not to break the glass and also not to break the `T' studs.