Displaying and Understanding Measurements
- Stop recording measurements by pressing the "Hold Screen" button. Note: If the "Hold Screen" button is pressed again, the recorded measurements will immediately be deleted and new measurements started.
- Recorded data may be called up by pressing the screen button "Memory" and paged through with the aid of the "arrow keys" on the upper corners of the screen. When the maximum recording duration has been used, measured values can be called up for a total of 10 screens.
- Momentary current fluctuations are normal and should be ignored. "Maximum" display captures these momentary fluctuations and also should be ignored.
- An increased closed-circuit current will also be intermittently measured for a few seconds due to the use of remote-control keys of other vehicles, or other radio transmitters in the frequency range 315 MHz. In these cases, the BC1 wakes up for key identification, then goes back to sleep when its own key is not recognized.
This is normal operation.