New Mini Tools (M04 02 04)

Publication date: 2004-07-01
Reference number: M04 02 04

NEW MINI TOOLS

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI M04 02 04, Date of Issue: July 2004

MINI:	R50, R53
GROUP:	Tools and Equipment

SUBJECT

New MINI Tools

MODEL

R50, R53

SITUATION

Distribution of the following tools will be through the Automatic Tool Shipment Program. Additional tools may be purchased through your PDC. All prices on this bulletin are introductory prices and are only valid during the Automatic Tool Shipment.

Adjustment spindle

PN 90 88 0 115 150

Fig 1: Adjustment Spindle

Used in conjunction with 118 370 (SI M04 01 02 ) to support the engine. Refer to repair manual section 11 12 100.

Fig 2: Adjustment Spindle Supporting Engine

Vibration damper remover

PN 90 88 0 118 440

1. Adapter plate with bolts
2. Spindle
3. Nut

Fig 3: Vibration Damper Remover

Used to R & R the vibration damper on W11 engines due to a production change. The change started in April 2004 production. Refer to repair manual section 11 23 010.

Fig 4: Adapter Plate Installation

Handbrake cable release tool

PN 90 88 0 346 330

Fig 5: Handbrake Cable Release Tool

Used to remove the handbrake cable. This tool supersedes 90 88 0 346 310. Refer to repair manual section 34 41 120.

Fig 6: Removing Handbrake Cable

Tie Rod Wrench

PN 90 88 0 323 200

Fig 7: Tie Rod Wrench

Used in conjunction with a torque wrench (SI M04 04 03 ) to adjust the tie rod linkage. Refer to repair manual section 32 21 231.

Fig 8: Adjusting Tie Rod Linkage With Torque Wrench

WARRANTY INFORMATION

Refer to Parts Information bulletin 01 01 95 for tool warranty details.