LEMON Manuals: Even more car manuals for everyone
Home >> Merkur >> 1987 >> XR4Ti Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Alternator - BOSCH >> Testing (On Vehicle) >> Diode Test

Diode Test

  1. Start and run engine at 1500 RPM. Record output voltage at terminal "B+". Measure voltage at terminal "D+". Voltage reading should be within .5 volts of battery voltage..
  2. If terminal "D+" voltage is lower, alternator field diodes are defective. If output voltage is high (overcharging) and field diodes are okay, voltage regulator is defective.
scientia non olet · About LEMON Manuals