LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2011 >> Milan Base, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Removal And Installation >> Knee Air Bag Module >> Installation

Knee Air Bag Module: Installation

  1. Install 4 new J-nuts.
  2. Install the knee air bag module and 4 bolts.
    • Tighten to 9 Nm (80 lb-in).
  3. Connect the knee air bag module electrical connector.
  4. Attach the wiring harness to the knee air bag module bracket.
  5. Install the lower steering column shroud.
  6. Install the steering column opening cover reinforcement and 4 bolts.
    • Tighten to 3 Nm (27 lb-in).
  7. Install the steering column opening trim panel and 2 screws.
  8. Repower the SRS. For additional information, REFER to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) DEPOWERING AND REPOWERING  in the General Procedures portion of this service information.
scientia non olet · About LEMON Manuals