LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2011 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 39 (Automatic Transaxle - 6F35 - Disassembly, Disassembly And Assembly Of Subassemblies, Assembly, Installation) >> Disassembly And Assembly Of Subassemblies >> Clutch Support Tower >> Disassembly

Clutch Support Tower: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Using a suitable tool, remove and discard the 4 Teflon® seals.
    Fig 1: Removing Teflon® Seals
    G07783242Courtesy of FORD MOTOR CO.
  2. Clean and inspect the clutch support tower for damage. Install a new clutch support tower if damaged.
    Fig 2: Identifying Clutch Support Tower
    G07783243Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals