LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2011 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1564 (HVAC - Climate Control System) >> Removal And Installation >> Blower Motor Speed Control >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the 3 RH lower instrument panel insulator screws and remove the insulator.
  2. Disconnect the blower motor speed control electrical connector.
  3. Remove the 2 blower motor speed control screws.
  4. Remove the blower motor speed control.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals