LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2011 >> Milan Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1538 (Acceleration Control System) >> Removal And Installation >> Accelerator Pedal >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Lincoln MKT. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the accelerator pedal sensor electrical connector.
  2. Remove the 3 accelerator pedal and sensor bolts.
    • To install, tighten to 7 Nm (62 lb-in).
  3. Remove the accelerator pedal and sensor assembly.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals