LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2011 >> Milan Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Electronically Controlled Continuously Variable Transmission (ECVT)) >> In-Vehicle Repair >> Transaxle Support Insulator - Anti-Roll >> Removal

Transaxle Support Insulator - Anti-Roll: Removal

WARNING: This page is about a different variant/trim than selected.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING article.
  2. Remove the 7 screws and the underbody cover.
    Fig 1: Locating Underbody Cover Mounting Screws
    G06257240Courtesy of FORD MOTOR CO.
  3. Remove the 2 bolts and remove the roll restrictor.
Fig 2: Locating Roll Restrictor Mounting Bolts
G06275521Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals