LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2011 >> Grand Marquis 4.6 W >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Acceleration Control System >> Removal And Installation >> Accelerator Pedal and Bracket >> Removal

Accelerator Pedal and Bracket: Removal

    NOTE: To prevent setting DTCs, make sure the ignition switch is in the OFF position prior to disconnecting the accelerator pedal electrical connectors.
  1. Disconnect the accelerator pedal sensor electrical connector.
  2. Disconnect the accelerator pedal motor electrical connector.
  3. Disconnect the accelerator pedal motor drive cable connector.
  4. Remove the 3 nuts and the accelerator pedal and bracket assembly.
scientia non olet · About LEMON Manuals