LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Bushing Diameter

Connecting Rod Bushing Diameter

NOTE: Refer to SPECIFICATIONS (2.5L), SPECIFICATIONS (Hybrid), SPECIFICATIONS (3.0L) and SPECIFICATIONS (3.5L) for the specification.
  1. Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped.
    Fig 1: Locating Connecting Rod Bushing Diameter
    G06064087Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
    Fig 2: Checking Connecting Rod Bushing Diameter Using Micrometer
    G06181481Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals