LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - 6F35 >> Disassembly And Assembly Of Subassemblies >> Clutch Support Tower >> Disassembly

Clutch Support Tower: Disassembly

  1. Using a suitable tool, remove and discard the 4 Teflon® seals.
    Fig 1: Removing Teflon® Seals
    G06278798Courtesy of FORD MOTOR CO.
  2. Clean and inspect the clutch support tower for damage. Install a new clutch support tower if damaged.
Fig 2: Identifying Clutch Support Tower
G06278799Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals