LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2010 >> Milan Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Charging System & Fuel Control System - 2.5L (Except Hybrid) >> Removal And Installation >> Fuel Pump Control Module >> Removal and Installation

Removal and Installation

  1. Position aside the LR quarter panel luggage compartment trim.
  2. Disconnect the Fuel Pump (FP) control module electrical connector.
  3. Remove the 2 pin-type retainers and the FP  control module.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals