LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Premier, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1809 (Wiper System & Washer System) >> Removal And Installation >> Wiper/Washer Module >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the Smart Junction Box (SJB) aside by pushing upward then pulling outward to release it from the SJB bracket.
  2. Disconnect the wiper/washer module connector.
  3. Pull down on the wiper/washer module to release it from the SJB bracket.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals