Component testing procedure
COMPONENT TESTING PROCEDURE
| Circuit to test | Connect self powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Horizontal circuit | 4 and 3 6 and 2 |
Forward | Closed circuit |
| Closed circuit | |||
| 4 and 6 3 and 2 |
Rearward | Closed circuit | |
| Closed circuit | |||
| Front Height circuit | 4 and 1 8 and 2 |
Up | Closed circuit |
| Closed circuit | |||
| 4 and 8 1 and 2 |
Down | Closed circuit | |
| Closed circuit | |||
| Rear Height circuit | 4 and 5 7 and 2 |
Up | Closed circuit |
| Closed circuit | |||
| 4 and 7 5 and 2 |
Down | Closed circuit | |
| Closed circuit |