LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Removal And Installation >> Power Steering Pump Pulley >> Installation

Power Steering Pump Pulley: Installation

    NOTE: Inspect the pulley hub for marks. If the pulley hub has no marks or one mark, mark the pulley hub with paint before installing it. If the pulley hub has 2 marks, install a new pulley.
  1. Using the special tool, install the power steering pump pulley.
    2. Fig 1: Identifying Special Tool (211-185)
    GF0045927Courtesy of FORD MOTOR CO.
  2. Install the power steering pump. For additional information, refer to Power Steering Pump .
scientia non olet · About LEMON Manuals