LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 560 (Electronic Engine Control System) >> Removal And Installation >> Camshaft Position (CMP) Sensor >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery ground cable. For additional information, refer to REMOVAL AND INSTALLATION .
  2. Disconnect the CMP sensor electrical connector.
  3. Remove the bolt and the CMP sensor.
    • To install, tighten to 10 N.m (89 lb-in).
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals