LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1892 (Engine Controls - Pinpoint Test HY: Generator/Regulator System Through Pinpoint Test KD: Electric Exhaust Gas RECIRCULATION (EEGR) System - (Except Diesel & Hybrid)) >> Pinpoint Test KA: Fuel Pump (FP) Relay >> Introduction >> Notes

Pinpoint Test KA: Fuel Pump (FP) Relay: Introduction: Notes

WARNING: This page does not describe the selected car, but rather 30 other vehicles, including the 2006 Mercury Mountaineer, 2006 Mercury Monterey, 2006 Mercury Montego, 2006 Mercury Milan, and 2006 Mercury Mariner. However, it is still accessible from the selected car via links, so may be relevant.

This pinpoint test is intended to diagnose the following:

The VPWR and FP circuits may be reversed in the harness connector. Refer to the appropriate SYSTEM WIRING DIAGRAMS for schematic and connector information.

Fig 1: Fuel Pump (FP) Relay Connector
G04587248Courtesy of FORD MOTOR CO.
Fig 2: Inertia Fuel Shutoff (IFS) Switch Connector
G04587249Courtesy of FORD MOTOR CO.