LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1752 (Electronically Controlled Continuously Variable Transmission (ECVT)) >> In-Vehicle Repair >> Transaxle Support Insulator - Anti-Roll >> Installation

Transaxle Support Insulator - Anti-Roll: Installation

WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the roll restrictor in place and install the 2 bolts.
    • Tighten to 90 Nm (66 lb-ft).
    Fig 1: Locating Roll Restrictor Mounting Bolts
    G06275521Courtesy of FORD MOTOR CO.
  2. Install the underbody cover and 7 screws.
Fig 2: Locating Underbody Cover Mounting Screws
G06257240Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals