LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Acceleration Control System) >> Removal And Installation >> Accelerator Pedal >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the accelerator pedal sensor electrical connector.
  2. Remove the 3 accelerator pedal and sensor retaining bolts.
    • To install, tighten to 9 Nm (80 lb-in).
  3. Remove the accelerator pedal and sensor assembly.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals