Component testing procedure
WARNING: This page is about a different car, the 2009 Mercury Grand Marquis and 2009 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
COMPONENT TESTING PROCEDURE
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Left mirror | Selector switch left | ||
| Up | 3 and 5 1 and 6 |
Up | Closed circuit |
| Down | 3 and 6 5 and 1 |
Down | Closed circuit |
| Left | 3 and 8 1 and 6 |
Left | Closed circuit |
| Right | 3 and 6 8 and 1 |
Right | Closed circuit |
| Right mirror | Selector switch right | ||
| Up | 3 and 2 1 and 6 |
Up | Closed circuit |
| Down | 3 and 6 1 and 2 |
Down | Closed circuit |
| Left | 3 and 7 1 and 6 |
Left | Closed circuit |
| Right | 3 and 6 7 and 1 |
Right | Closed circuit |