LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1225 (Front Disc Brake System) >> Removal And Installation >> Front Disc Brake >> Installation

Front Disc Brake: Installation

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean any rust or foreign material from brake disc and wheel hub.
    • Use brake parts cleaner to clean the front brake disc and hub surfaces.
  2. Apply a thin coat of anti-seize lubricant to the hub flange.
  3. Install the brake disc.
  4. Install a new brake disc screw.
    • Tighten to 12 Nm (9 lb-ft).
  5. Position the brake caliper and brake caliper anchor plate assembly and install 2 new bolts.
    • Tighten to 150 Nm (111 lb-ft).
scientia non olet · About LEMON Manuals