LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1225 (Front Disc Brake System) >> Removal And Installation >> Front Brake Caliper Anchor Plate >> Installation

Front Brake Caliper Anchor Plate: Installation

WARNING: This page is about a different car, the 2008 Mercury Sable, 2008 Ford Taurus X, and 2008 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the brake caliper anchor plate and steering stop on the wheel knuckle and install 2 new bolts.
    • Tighten to 150 Nm (111 lb-ft).
  2. Install the brake pads. For additional information, refer to Brake Pads .
scientia non olet · About LEMON Manuals