LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis (Single Page) >> Steering >> Power Steering >> Steering System - General Information >> Diagnostic Tests >> Steering System >> Component Tests >> Steering Linkage

Steering Linkage

    NOTE: Excessive vertical motion of the studs relative to the sockets may indicate excessive wear.
  1. With the vehicle on the ground and the parking brake applied, start the vehicle and carry out the following:
    • Have an assistant rotate the steering wheel left and right 360 degrees and watch for relative motion of the studs in the steering linkage ball sockets.
    • Watch for loose steering gear mounting.
  2. An additional check is with the key on, engine off (KOEO) and the front wheels raised off the ground. Grasp the wheel at the front and rear and watch for excessive play or binding in the joints while trying to steer the wheels.
  3. Install new components if necessary. Tighten any worn, damaged or loose components.