LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2009 >> Sable Base, AWD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 1711 (Cruise Control System - Speed Control) >> Removal And Installation >> Speed Control Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the driver air bag module. For additional information, refer to REMOVAL AND INSTALLATION article.
  2. Remove the screw and the speed control switch.
    • Disconnect the electrical connector.
    • To install, tighten to 7 Nm (62 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals