Audio Systems Without Navigation
NOTE:
The terms "Audio Control Module (ACM)" and "audio unit" refer to the same component.
- Turn the ACM on.
- Press and hold preset buttons 3 and 6 for 3 seconds. The speaker walk-around test will begin.
- Before the speaker walk-around test is complete, press preset button 6.
- Press the TUNE UP button.
- Record the ACM part number.
- Turn the ACM off.
NOTE:
This step will cause the ACM to auto-scroll through configuration 1, configuration 2, EEPROM number, and ACM part number.
NOTE:
Step 4 may need to be repeated until the ACM part number can be recorded.