Removal And Installation

Fig 1: Exploded View Of Accelerator Pedal With Torque Specification

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	14A464	Accelerator pedal sensor electrical connector
2	W506015	Accelerator pedal bolts (2 required)
3	9N972	Accelerator pedal

NOTE: To prevent setting DTCs, make sure the ignition switch is in the OFF position prior to disconnecting the accelerator pedal sensor electrical connectors.

Disconnect the accelerator pedal sensor electrical connector.
Remove the 2 bolts and the accelerator pedal assembly.
- To install, tighten to 9 Nm (80 lb-in).
To install, reverse the removal procedure.