LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Sable Base, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Transfer Case - Power Transfer Unit (PTU)) >> In-Vehicle Servicing >> Intermediate Shaft Seal and Deflector >> Notes

Intermediate Shaft Seal and Deflector: Notes

WARNING: This page is about a different variant/trim than selected.
Special Tools

Illustration Tool Name Tool Number
GF0041491Courtesy of FORD MOTOR CO.
Bearing Cup Remover 308-125 (T87P-7120-D)
GF0041487Courtesy of FORD MOTOR CO.
Handle, Driver 32 in 205-907
GF0041492Courtesy of FORD MOTOR CO.
Installer, PTU Linkshaft Seal 205-883
GF0041493Courtesy of FORD MOTOR CO.
Installer, PTU Linkshaft Seal Dust Shield 205-882
GF0001027Courtesy of FORD MOTOR CO.
Remover, Front Wheel Hub 205-D070 (D93P-1175-B) or equivalent
GF0009877Courtesy of FORD MOTOR CO.
Remover, Halfshaft 205-241
General Equipment

16 mm (5/8 in) washer (used with 308-125)
Material

Item Specification
Metal Brake Parts Cleaner
PM-4-A or PM-4-B (US); CPM-4 (Canada)
-
Motorcraft MERCON® LV Automatic Transmission Fluid
XT-10-QLV
MERCON® LV
Silicone Brake Caliper Grease and Dielectric Compound
XG-3-A
ESE-M1C171-A