LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Sable Base, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Handles, Locks, Latches And Entry Systems >> General Procedures >> Autolock and Horn Chirp Programming >> Programming the Autolock Feature Using the Instrument Cluster Message Center

Programming the Autolock Feature Using the Instrument Cluster Message Center

NOTE: The autolock feature can be activated or deactivated independently of the auto-unlock feature.
NOTE: The autolock feature of the SJB can also be configured ON or OFF with the scan tool. For additional information on module configuration, refer to MODULE CONFIGURATION article.
  1. With all the vehicle doors closed, turn the ignition key from the OFF to the ON position.
  2. Press the SETUP button on the message center switch until AUTOLOCK <ON> OFF is displayed.
  3. Press the RESET button to select ON or OFF. If the autolocks are enabled, the message center will have brackets around the <ON> display. If the autolocks are disabled, the message center will have brackets around the <OFF> display.
scientia non olet · About LEMON Manuals