Cylinder Head Temperature (CHT) Sensor

Fig 1: Exploded View Of Cylinder Head Temperature (CHT) Sensor With Torque Specification

Courtesy of FORD MOTOR CO.

Item	Part Number	Description
1	14A464	Cylinder head temperature (CHT) sensor electrical connector
2	6G004	CHT sensor

1. Remove the lower intake manifold. For additional information, refer to ENGINE - 3.5L article.
2. Disconnect the cylinder head temperature (CHT) sensor electrical connector.
3. Remove and discard the CHT sensor.
   • To install, tighten to 10 Nm (89 lb-in).
4. To install, reverse the removal procedure.
   • Do not reuse the CHT sensor, install a new sensor.