LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2008 >> Sable Base, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Information System And Entertainment Systems >> Removal And Installation >> Rear Entertainment Module (RETM) >> Removal

Rear Entertainment Module (RETM): Removal

NOTE: Programmable Module Installation (PMI) only needs to be carried out if the Rear Entertainment Module (RETM) is being replaced.
  1. Upload the RETM configuration to the scan tool. For additional information, refer to MODULE CONFIGURATION article.
    2. NOTE: Open the display.
  2. Remove the 4 screws.
  3. Remove the RETM.
    • Pull down on the sides of the RETM to disengage the clips from the bracket.
    • Using a suitable tool, push the rear most U-hook forward and release the U-hooks.
    • Hang the RETM on the J-hooks and disconnect the electrical connector.
    • Remove the RETM from the J-hooks.
scientia non olet · About LEMON Manuals