LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2007 >> Monterey >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Servicing >> Output Shaft Speed (OSS) Sensor >> Removal

Output Shaft Speed (OSS) Sensor: Removal

  1. Remove the catalytic converter. For additional information, refer to EXHAUST SYSTEM article.
  2. Remove the heat shield.
    3. Fig 1: Locating Heat Shield
    GF0033426Courtesy of FORD MOTOR CO.
  3. Disconnect the output speed shaft speed (OSS) sensor connector.
    4. Fig 2: Output Speed Shaft Speed (OSS) Sensor Connector
    GF0020131Courtesy of FORD MOTOR CO.
  4. Remove the OSS cover.
    1. Remove the connector.
    2. Remove the bolt.
    3. Remove the cover.
    5. Fig 3: Identifying OSS Cover & Connector
    GF0033427Courtesy of FORD MOTOR CO.
  5. Remove the OSS sensor.
    6. Fig 4: Output Speed Shaft Speed (OSS) Sensor
    GF0020133Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals