LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2007 >> Monterey >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Removal And Installation >> Speed Control Cable >> Removal

Speed Control Cable: Removal

  1. Remove the air cleaner assembly. For additional information, refer to INTAKE AIR DISTRIBUTION AND FILTERING article.
  2. Disconnect the speed control cable from the throttle lever end.
  3. Remove the speed control cable from the throttle bracket.
  4. Disconnect the speed control cable from the speed control actuator.
    1. Press the locking tab.
    2. Rotate the speed control cable cap counterclockwise.
    5. Fig 1: Speed Control Cable Locking Tab & Cap
    GF0033606Courtesy of FORD MOTOR CO.
  5. Disconnect the speed control cable from the speed control actuator pulley.
    1. Gently push the retaining spring.
    2. Disconnect the speed control cable slug from the speed control actuator pulley.
    6. Fig 2: Speed Control Cable At Speed Control Actuator Pulley
    GF0025567Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals