LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2007 >> Montego Base, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission - Continuously Variable Transmission (CVT) >> Disassembly And Assembly Of Subassemblies >> Transmission Range (TR) Sensor >> Disassembly

Transmission Range (TR) Sensor: Disassembly

  1. Remove the bolts for the transaxle range sensor and remove it from the valve.
    2. Fig 1: Locating Transaxle Range Sensor Bolts
    GF0017551Courtesy of FORD MOTOR CO.
    NOTE: If damage is indicated on the manual valve a new housing assembly must be installed into the case.
  2. Remove and inspect the manual control valve.
    3. Fig 2: Locating Manual Control Valve
    GF0017552Courtesy of FORD MOTOR CO.
  3. Remove and discard the range sensor sealing sleeve.
    4. Fig 3: Range Sensor Sealing Sleeve
    GF0017553Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals