LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2007 >> Montego Base, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission - Continuously Variable Transmission (CVT) >> Disassembly And Assembly Of Subassemblies >> Transmission Range (TR) Sensor >> Assembly

Transmission Range (TR) Sensor: Assembly

  1. Install a new range sensor sealing sleeve.
    2. Fig 1: Range Sensor Sealing Sleeve
    GF0017553Courtesy of FORD MOTOR CO.
  2. Install the manual control valve into the housing and connect the transaxle range sensor. Make sure that the tab on the manual valve is correctly seated into the transaxle range sensor.
    • Tighten to 5 Nm (44 lb-in).
    3. Fig 2: Locating Transaxle Range Sensor Bolts
    GF0017554Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals