LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2007 >> Montego Base, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission - Continuously Variable Transmission (CVT) >> Disassembly And Assembly Of Subassemblies >> Side Shaft Gear Assembly >> Assembly

Side Shaft Gear Assembly: Assembly

  1. If removed, press the gear assembly into the cover.
    2. Fig 1: Locating Gear Assembly
    GF0017535Courtesy of FORD MOTOR CO.
    NOTE: A snap ring is required.
  2. If removed, install a new snap ring.
    3. Fig 2: Locating Snap Ring
    GF0017532Courtesy of FORD MOTOR CO.
  3. Using the special tool, install a new rubber dust cover.
    4. Fig 3: Installing Rubber Dust Cover
    GF0017536Courtesy of FORD MOTOR CO.
  4. Install a new side gear assembly O-ring seal.
    5. Fig 4: Locating Side Shaft Gear Assembly O-Ring Seal
    G03990771Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals