LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2007 >> Milan Base, 3.0 1, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seating >> Removal And Installation >> Climate Controlled Seat Module >> Installation

Climate Controlled Seat Module: Installation

  1. Install the DCSM to the seat.
    • Position the DCSM to the electrical bracket and install 2 new rivets.
    • Connect the 3 DCSM electrical connectors and locking wedges.
  2. Install the front seat and repower the SRS. Do not prove out the SRS at this time.  For additional information, refer to Seat - Front .
  3. Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test. For additional information, refer to the General Procedures portion of SUPPLEMENTAL RESTRAINT SYSTEM .
  4. After installing the DCSM, carry out the appropriate steps in the PMI procedure. For additional information, refer to MODULE CONFIGURATION .
scientia non olet · About LEMON Manuals