Pinpoint Test B: The Shift Control Is Out Of Correct Gear Relationship

• Gain access to the shift control components.
• Key in ACCESSORY position.
• Apply the brake pedal.
• Observe all shift control components while shifting the gearshift lever through all ranges.
• Are any of the components damaged? 

Yes  : REPAIR as necessary. REINSTALL all components. TEST the system for normal operation.

No  : GO to  B2.

• Check that the shift cable and bracket installation is correct.
• Is the shift cable and bracket installed correctly? 

Yes  : GO to  B3.

No  : REINSTALL the shift cable. GO to  B3.

• Check that the shift cable adjustment is correct. Refer to SELECTOR LEVER CABLE ADJUSTMENT  in this article.
• Is the shift cable adjusted correctly? 

Yes  : GO to  B4.

No  : ADJUST the shift cable. GO to  B4.

• CHECK that the selector lever indicator adjustment is correct. REFER to SELECTOR LEVER CABLE ADJUSTMENT  in this article.
• Is the selector lever indicator adjusted correctly? 

Yes  : GO to  B5.

No  : ADJUST the selector lever indicator. GO to  B5.

• Check that the digital transmission range (TR) sensor adjustment is correct. Refer to AUTOMATIC TRANSAXLE/TRANSMISSION .
• Is the digital transmission range (TR) sensor adjusted correctly? 

Yes  : REFER to AUTOMATIC TRANSAXLE/TRANSMISSION for internal transaxle repair.

No  : ADJUST the digital transmission range (TR) sensor, REFER to AUTOMATIC TRANSAXLE/TRANSMISSION . TEST the system for normal operation. If the condition persists, REFER to AUTOMATIC TRANSAXLE/TRANSMISSION for internal transaxle repair.