LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2006 >> Montego Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Repair >> Oil Pan >> Removal

Oil Pan: Removal

CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan, can cause engine failure.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the front catalytic converter. For additional information, refer to REMOVAL AND INSTALLATION .
  3. Remove the 2 bolts and the front catalytic converter bracket.
    Fig 1: Locating Front Catalytic Converter Bracket Bolts
    G04655714Courtesy of FORD MOTOR CO.
  4. Drain the engine oil and install the drain plug.
    • Tighten to 26 N.m (19 lb-ft).
  5. Remove and discard the oil filter.
  6. Remove the torque converter lower inspection cover.
  7. Remove the 2 oil pan-to-transaxle bolts.
  8. Remove the oil pan-to-oil filter adapter bolt.
  9. Remove the 15 bolts and the oil pan.
    • Remove and discard the gasket.
scientia non olet · About LEMON Manuals