Fluid Level Check (6-Speed): Notes
NOTE:
The transmission fluid should be checked at normal operating temperature 70°C-80°C (158°F-176°F) on a level surface. Normal operating temperature can be reached after approximately 32 km (20 miles) of driving.
Under normal circumstances, the fluid level should be checked during normal maintenance. If the transaxle starts to slip, shifts slowly or shows signs of fluid leaking, the fluid level should be checked.
- With the transaxle in PARK, the engine at idle, foot pressed on the brake, move the selector lever through each gear and allow engagement of each gear. Place the selector lever in the PARK position.
- Wipe the fluid level indicator cap and remove the fluid level indicator.
- Wipe the fluid level indicator with a clean cloth.
- Install the fluid level indicator back in the fluid indicator tube until it is fully seated, then remove the indicator. The fluid level should be within the normal operating range.