LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2005 >> Sable Platinum Edition >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> General Procedures >> Selector Lever Cable Adjustment - Floor Shift

Selector Lever Cable Adjustment - Floor Shift

NOTE: The shift control cable adjustment procedure must be performed in the order shown.
  1. Position the transaxle range selector lever in OVERDRIVE.
  2. Loosen the manual control lever-to-shift control cable nut.
    Fig 1: Locating Manual Control Lever-To-Shift Control Cable Nut - Floor Shift
    G03957538Courtesy of FORD MOTOR CO.
  3. Position the manual control lever in OVERDRIVE. Tighten the nut.
    Fig 2: Tightening Manual Control Lever-To-Shift Control Cable Nut - Floor Shift
    G03957539Courtesy of FORD MOTOR CO.
  4. Check the operation of the transaxle in each transaxle range selector lever position.
scientia non olet · About LEMON Manuals