Transaxle Support Insulator: Installation

WARNING: This page is about a different variant/trim than selected.

Clean the rear transaxle mount bolts using a wire brush and apply new Threadlocker to the threads.
Position the transaxle mount in place and install the upper bolts.
- Tighten to 55 Nm (41 lb-ft).
  
  Fig 1: Installing Upper Bolts
  Courtesy of FORD MOTOR CO.
Install the rear transaxle mount. Install the bolts.
- Tighten to 90 Nm (66 lb-ft).
  
  Fig 2: Identifying Bolts For Rear Transaxle Mount
  Courtesy of FORD MOTOR CO.