LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2005 >> Montego Base, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Automatic Transmission - CVT) >> Disassembly And Assembly Of Subassemblies >> Side Shaft Gear Assembly >> Assembly

Side Shaft Gear Assembly: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. If removed, press the gear assembly into the cover.
    Fig 1: Pressing Gear Assembly Into Cover
    G03991126Courtesy of FORD MOTOR CO.
  2. If removed, install a new snap ring.
    Fig 2: Installing Snap Ring
    G03991123Courtesy of FORD MOTOR CO.
  3. Using the special tool, install a new rubber dust cover.
    Fig 3: Installing Rubber Dust Cover
    G03991128Courtesy of FORD MOTOR CO.
  4. Install a new side gear assembly O-ring seal.
    Fig 4: Installing Side Gear Assembly O-Ring Seal
    G03990771Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals