LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2005 >> Montego Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Removal And Installation >> Speed Control Switch >> Removal and Installation

Removal and Installation

  1. Remove the driver air bag module. REFER to SUPPLEMENTAL RESTRAINT SYSTEM .
  2. Remove the 2 screws and remove the speed control switch.
    • Disconnect the electrical connector.
    • To install, tighten to 7 Nm (62 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals