LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2005 >> Montego Base, AWD >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission - CVT >> Disassembly And Assembly Of Subassemblies >> Transmission Range (TR) Sensor >> Assembly

Transmission Range (TR) Sensor: Assembly

  1. Install the manual control valve into the housing and connect the transaxle range sensor. Make sure that the tab on the manual valve is correctly seated into the transaxle range sensor.
    • Tighten to 5 Nm (44 lb-in).
      Fig 1: Installing Manual Control Valve Into Housing
      G03991158Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals