Coupling - Spring Lock: Disconnect

WARNING: This page is about a different car, the 2004 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.

Relieve the fuel system pressure. For additional information, REFER to FUEL LINE EVACUATION .
Remove the fuel tube clip.

Fig 1: Removing Fuel Tube Clip
Courtesy of FORD MOTOR CO.
Install the Spring Lock Coupling Disconnect Tool.

Fig 2: Installing Spring Lock Coupling Disconnect Tool
Courtesy of FORD MOTOR CO.
Close and push the Spring Lock Coupling Disconnect Tool into the open side of the cage.

Fig 3: Closing And Pushing Spring Lock Coupling Disconnect Tool Into Open Side Of Cage
Courtesy of FORD MOTOR CO.
Separate the fitting.

Fig 4: Separating Fitting
Courtesy of FORD MOTOR CO.
Remove the Spring Lock Coupling Disconnect Tool.

Fig 5: Removing Spring Lock Coupling Disconnect Tool
Courtesy of FORD MOTOR CO.